
Publication Date:
RETA Mühendislik carries out the design, production, and installation of industrial racking systems for production facilities, food warehouses, and logistics centers in Edirne under a single point of responsibility. Founded in 1979, the company manufactures its systems in its own production facility in Manisa Muradiye OIZ and provides services to the Thrace line through organized shipping and installation.
Location and Production Defining Warehousing Needs in Edirne
Edirne is situated at Turkey's land gateway to Europe, and its warehousing needs arise from both local production and this transit traffic.
Customs and logistics facilities along the Kapıkule and Hamzabeyli route constitute the distinguishing arm of the province. In these warehouses, goods do not stay for long periods; they remain for a short time for customs clearance, vehicle transfers, or consolidation. The decisive factor here is not total capacity, but how quickly a consignment can be unloaded and reloaded.
In the Edirne Organized Industrial Zone and the Havsa line, there are facilities engaged in the production of food, packaging, plastics, and machinery. Storage in sacks and big bags is common in rice, sunflower oil, and flour processing facilities, where harvest seasons create variations in occupancy throughout the year.
Agricultural processing facilities and textile manufacturers along the Keşan and Uzunköprü route form the third pillar. The province's location between Istanbul and Europe also leads to a concentration of distribution and transit warehouses here.
Fast Inbound and Outbound Flow for Short-Stay Cargo
In a warehouse on the border line, cargo often waits not for weeks, but for days or even hours. In such a setup, a poorly planned aisle loses much more time than capacity, prolongs vehicle dwell times, and directly increases costs.
The layout is therefore built around the location of the entrance and exit doors. Bays closer to the unloading area are allocated for fast-moving consignments, while cargo awaiting customs clearance or paperwork is placed in the rear area. When cargo belonging to the same consignment or customs declaration needs to be physically kept together, this segregation is reflected in the bay groups from the outset.
Bays are numbered in an addressable system, preventing different consignments from mixing and shortening inventory count times. Since pallet dimensions vary in international transport, bay depths are designed to accommodate the two most commonly used dimensions simultaneously.
Edirne is located in a region with spectral acceleration values that must be considered under earthquake regulations; anchoring and bracing patterns are calculated based on these parameters. Static calculations are carried out individually for each project; quotes are not given based on catalog capacities.
Prominent Systems Along the Edirne OIZ and Kapıkule Route
In logistics warehouses, food storage facilities, and finished goods sections of production plants, pallet racking systems are designed according to pallet dimensions, forklift types, and clear ceiling height. Euro pallets (800x1200 mm) and industrial pallets (1000x1200 mm) require different bay depths and beam spans; for loads such as sacks and big bags, bay dimensions are customized to the product.
For piecemeal dispatches and warehouses focused on order picking, carton and box handling racking systems are used. Bays are arranged in an addressable layout, tier heights are adjusted according to box dimensions, and fast-moving items are placed within easy-reach zones.
In warehouses where ceiling height cannot be fully utilized, mezzanine racking systems double or triple the available floor space. For businesses operating in rented warehouses, this is often the solution that maximizes volume without requiring building investment.
In machinery and metalworking plants, long materials such as profiles, pipes, and sheet metal are managed with cantilever racking systems; mold storage for packaging and plastics manufacturers is handled with mold racking systems; and warehouses with high inventory turnover rates are managed with automated storage AS/RS solutions. All system types can be found on our racking systems page.
Site Survey and Quotation Process for Edirne Warehouse Racking Systems
To receive a layout plan and price quote for your facility in Edirne, contact us via our contact page. Completed projects across various sectors can be viewed on our projects page.
Installation Without Disrupting Vehicle Traffic
During the site survey, floor conditions and flatness, column axes, clear ceiling height, sprinkler and lighting arrangements, forklift types used, and pallet dimensions are recorded. In logistics warehouses, daily vehicle traffic, the locations of inbound and outbound doors, and average dwell times are also noted, as aisle orientation and bay grouping are derived directly from this flow.
Once capacity calculations, static calculations, and technical drawings are approved, production takes place at the Muradiye OIZ facility. The installation schedule is structured according to daily vehicle traffic: the warehouse is divided into phases, empty areas are operationalized first, cargo is moved gradually, and installation continues in the cleared areas. Load capacity labels and operating instructions are provided upon handover.
Frequently Asked Questions About Edirne Racking Systems
Can a layout be designed to shorten vehicle dwell times?
Yes, it can. Bays close to the unloading area are allocated to fast-moving goods, while cargo awaiting paperwork or processing is placed in the rear area. When aisle orientation is planned according to the location of entry and exit doors, forklift travel cycles are significantly reduced.
How is an arrangement established that prevents different consignments from mixing?
Bay groups are categorized by consignment, customer, or declaration, and bays are numbered in an addressable system. The label surface and scanning angle are determined during the design phase, thereby speeding up inventory counting and checking processes.
Can pallets of different dimensions be managed within the same system?
Yes, they can. The bay depth is planned to accommodate the two most frequently used pallet dimensions, and beam spans are determined accordingly. If there are significantly different dimensions, a separate section is designated.
What is recommended for a food warehouse that reaches full capacity during harvest periods?
The layout is planned not only for peak occupancy, but according to usage variations throughout the year. Sections are allocated that can operate at full capacity during busy periods and transition into consolidation zones during off-peak times.
What information do we need to provide for a quote?
Warehouse area and clear ceiling height, pallet dimensions used, weight per pallet, daily vehicle traffic or target number of bays, forklift types used, and the existing layout plan (if available) are sufficient. The definitive quotation is prepared following the site survey and static calculations.
Do you want to receive more information? We have expert and reliable contact persons available for any questions, issues, and suggestions.
Reta Engineering Warehouse Racking Systems Industry and Trade Inc.
Address
Muradiye Organized Industrial Zone, 10th St. No: 30 Yunusemre / Manisa
info@retamuhendislik.com.tr





